Cusptips

An efficient technique for crown preparations

437 Comments / Uncategorized / By

An efficient technique for crown preparations

The reverse crown technique is a faster more efficient way of preparing crowns. By preparing the margin first, you will be able to prepare the tooth quicker, easier, and with better margins.

Typically, we feel like the most important part of the crown preparation is the crown margin because this is where the crown fits with the margin of the tooth. And so, the margin needs to be very clearly defined.

If you’re preparing the tooth with a tapered diamond and trying to reduce the walls of the tooth and remove all the enamel and create the margin at the same time, it can be slow and sometimes difficult to achieve smooth margins. This is why you should try this technique starting with the margin first.

7 steps for efficient crown preparation

So when doing crown preparation start with the margin first.

Step one

Take the 331 bur to break the interproximal contacts, whether it’s an incisor or a molar: just take the 331 bur in between the teeth and break the contacts.

Step Two

Take a round diamond and hold the shank of the bur parallel to the axial wall of the tooth to prepare the margins on the buccal and the lingual of the tooth, whether it’s an incisor or a molar, prepare the buccal and the lingual margins, at the gingival margins of the tooth.

The best part of this is that with just a round diamond ball shaped bur, you can go around the gingival margin very smoothly and easily and prepare that margin. There’s not a lot of resistance from the axial wall. It’s very easy to get a very well-defined margin.

Step Three

Use a round- ended tapered diamond. The diamond will be tapered to help converge the axial walls so that there won’t be undercuts in the prep.

So, use a round-ended tapered diamond to prepare the axial walls. And use that on the mesial and the distal of the tooth, also on the buccal and the lingual of the tooth, and just follow those gingival margins prepared by the round burr.

The round- ended tapered diamond, may be a little thinner if it’s preparing an anterior tooth like an incisor or a canine, and it may be a little thicker if it’s preparing a posterior tooth, like a premolar or a molar.

Sometimes on the incisors, you can use that round diamond to prepare the gingival margin and also use the round diamond to do a couple depth reduction cuts in the incisal third and the gingival facial third of the incisor.

Then use the rounded ended taper diamond to even out those depth reduction cuts on the facial of the incisors and maybe the canines. And this just helps to keep the convex contours on the facial of the incisor.

The facial of the incisor has a convexity, and having different depth reductions helps keep that contour of the incisor or the canine anterior tooth, especially if you’re doing multiple anterior teeth all at once. You might find that using that round diamond to do a few depth reduction cuts in the facial can be helpful.

Step four

Use a depth reduction bur, whether it’s a 1.5 or a 2.0 millimetre depth reduction bur, use that on the occlusal or the incisal edge just to measure the adjustment on the occlusal or incisal.

Step five

Take a football diamond to reduce the occlusal or the incisal to even that out and get the right clearance.

Step six

Use something called a Belle de St. Claire. It’s a rubber measuring gauge, it has varying thicknesses from 1.0 millimeters to 2.0 millimeters. Usually I’ll just take the 1.5 millimeter, and put it on the occlusal of the molar that’s hard to see in the posterior. Put the Belle de St. Claire on the molar after you’ve reduced the occlusion. Have the patient bite and then pull it out to the side.

And if you can pull it out without resistance, you will know you have at least 1.5 millimeters clearance. If you have resistance, then there’s a seventh step.

Step Seven

The final step is using an occlusal marking paper two millimeters thick.

The product is called Prep Check, made by a company called commonsensedental.com.

Prep Check has a blue marking indicator, so you can just put that on the molar if it’s hard to visualize where the tooth needs to be reduced more.
You can just put it on the molar, have the patient bite and wherever it’s two millimeters, it’ll leave a blue mark.

You can then use that football diamond to selectively reduce that area. And then go back to the Belle de St Sinclair with 1.5 millimetres and have them bite, pull the rubber measuring gauge out to make sure you can pull it out without resistance.

And then you will know if you have adequate reduction in occlusal clearance.

Efficient crown preparation

There’s a lot of fine details that you can add to the reverse crown preparation method. But by following these steps you will really help the efficiency of crown and bridge preparations.

437 thoughts on “An efficient technique for crown preparations”

  2. REEDAYSEK

    Psychopharmacological treatment in borderline personality disorder dapoxetine priligy uk The two best studies concluded that ocriplasmin is cost effective in their respective countries Canada and United Kingdom, but only in patients with certain conditions without epiretinal membrane, for example

    Reply
  11. Gregorylef

    Kupitvdnr.ru — это доска объявлений, где можно найти множество товаров и услуг от частных продавцов и компаний, например: работа Ростов. Здесь вы сможете приобрести всё необходимое по выгодным ценам и в удобном для вас месте. На сайте представлен широкий ассортимент товаров, от электроники и бытовой техники до одежды и обуви. Вы можете легко найти нужное объявление, используя фильтры поиска по категориям, цене, местоположению и другим параметрам.

    Reply
  23. JamesSor

    Хотите провести время с друзьями или семьёй в уютной обстановке? Сауны Москвы предлагают широкий выбор услуг: от классических парилок до современных спа-процедур. Подарите себе незабываемые впечатления! Подробности на сайте https://dai-zharu.ru/

    Reply

Leave a Comment

Your email address will not be published. Required fields are marked *